Calgary 403.235.2364
Edmonton 780.435.5455

Calgary 403.235.2364
Edmonton 780.435.5455

6.5″ 7/8 Lobes 4.8 Stages - POWER SECTION

Model No: DD650784.8
ROTOR SPECIFICATIONS
inchmm
Overall Length194.34,934
Conour Length187.84,769
Eccentricity0.2265.74
Major Diameter3.980101.09
Head Diameter3.50088.90
Weight497 (lbs) 225.4 (kg)
Material17-4SS
Thread Form*2 3/8 API REG

* Alternate or custom thread forms are available

STATOR SPECIFICATIONS
inchmm
Overall Length203.55,169
Rubber Cut Back8.0203
Tube O.D.6.50165.1
Tube I.D.5.00127.0
Alternate Length1223,099
Weight841 (lbs) 381 (kg)
Number of Stages4.8
Rubber TypeNBR-1A, HSN-38, NBR-HR
Tube Material4,142 Seamless Tubing
FIT INFORMATION
NBR-1A & HSN-38Minor Diameter
Stator Sizeinchmm
Standard3.50188.93
Oversize3.52989.64
Second Oversize
Nominal Fit at 75 F (25 C)
Standard0.0270.69
Oversize-0.001-0.03
Second Oversize
FIT INFORMATION
NBR-HRMinor Diameter
Stator Sizeinchmm
Undersize
Standard3.52089.41
Oversize
Nominal Fit at 75 F (25 C)
Undersize
Standard0.0080.20
Oversize
Model No: DD650784.8
ROTOR SPECIFICATIONS
inchmm
Overall Length194.34,934
Conour Length187.84,769
Eccentricity0.2265.74
Major Diameter3.980101.09
Head Diameter3.50088.90
Weight497 (lbs) 225.4 (kg)
Material17-4SS
Thread Form*2 3/8 API REG

* Alternate or custom thread forms are available

STATOR SPECIFICATIONS
inchmm
Overall Length203.55,169
Rubber Cut Back8.0203
Tube O.D.6.50165.1
Tube I.D.5.00127.0
Alternate Length1223,099
Weight841 (lbs) 381 (kg)
Number of Stages4.8
Rubber TypeNBR-1A, HSN-38, NBR-HR
Tube Material4,142 Seamless Tubing
FIT INFORMATION
NBR-1A & HSN-38Minor Diameter
Stator Sizeinchmm
Standard3.50188.93
Oversize3.52989.64
Second Oversize
Nominal Fit at 75 F (25 C)
Standard0.0270.69
Oversize-0.001-0.03
Second Oversize
FIT INFORMATION
NBR-HRMinor Diameter
Stator Sizeinchmm
Undersize
Standard3.52089.41
Oversize
Nominal Fit at 75 F (25 C)
Undersize
Standard0.0080.20
Oversize
PERFORMANCE SPECIFICATIONSPERFORMANCE DETAILS
NBR-1A and HSN-38NBR-HR
Torque Slope7.977 ft-lb/psi 1.569 Nm/kPaMax Diff Press psi (kPa)720 (4,960)1,080 (7.450)
Flow Range 150 to 400 GPM 570 to 1,510 Litre/minMax Torque ft-lb (Nm)5,740 (7,790)8,620 (11,680)
Rotation0.330 Rev/Gal 0.087 Rev/LitreStall Diff Press psi (kPa)1,080 (7,450)1,620 (11,170)
Speed Range49 to 140 RPMStall Torque ft-lb (Nm)8,620 (11,680)12,920 (17,520)
Off Bottom Press88 psi 610 kPaMax Recommended HP (kW)144 (108)207 (154)
PERFORMANCE SPECIFICATIONSPERFORMANCE DETAILS
NBR-1A and HSN-38NBR-HR
Torque Slope7.977 ft-lb/psi 1.569 Nm/kPaMax Diff Press psi (kPa)720 (4,960)1,080 (7.450)
Flow Range 150 to 400 GPM 570 to 1,510 Litre/minMax Torque ft-lb (Nm)5,740 (7,790)8,620 (11,680)
Rotation0.330 Rev/Gal 0.087 Rev/LitreStall Diff Press psi (kPa)1,080 (7,450)1,620 (11,170)
Speed Range49 to 140 RPMStall Torque ft-lb (Nm)8,620 (11,680)12,920 (17,520)
Off Bottom Press88 psi 610 kPaMax Recommended HP (kW)144 (108)207 (154)

Operating a power section above the maximum recommended differential pressure will reduce stator life. Performance Curves are for reference only. Actual power section performance may vary depending on the down hole temperature and rotor/stator fit. Performance data are subject to change without notice. Power calculation is based on maximum RPM and full torque. Stator sizes subject to change without notice.

Operating a power section above the maximum recommended differential pressure will reduce stator life. Performance Curves are for reference only. Actual power section performance may vary depending on the down hole temperature and rotor/stator fit. Performance data are subject to change without notice. Power calculation is based on maximum RPM and full torque. Stator sizes subject to change without notice.

Copyright 2011 - 2022. All Rights Reserved. Challenger Downhole Tools.