Model No: AT500566.7
Click for a full page spec sheet suitable for printing
POWER SECTION
ROTOR SPECIFICATIONS | ||
---|---|---|
inch | mm | |
Overall Length | 241.0 | 6121.4 |
Contour Length | 235.0 | 5969.0 |
Eccentricity | 0.235 | 6.00 |
Major Diameter | 3.12 | 79.2 |
Head Diameter | 2.9 | 73.7 |
Weight | 383 (lbs) 174 (kg) | |
Material | 17-4 PH1 | |
Thread Form* | 2.375 HEF Modifier |
* Alternate or custom thread forms are available
STATOR SPECIFICATIONS | ||
---|---|---|
inch | mm | |
Overall Length | 250.0 | 6350.0 |
Tube OD | 5.00 | 127.0 |
Tube ID | 4.00 | 101.6 |
Rubber Cutback Top/End | 8/8 | 203.2/203.2 |
Number of Stages | 6.7 | 6.7 |
Weight | 496 (lbs) 225 (kg) | |
Material | 4140/4142 Alloy Steel | |
Rubber Options | NBR, NBR-HPX/HPW |
NBR (in.) – Fits (+Compression / -Loose) | ||||||
---|---|---|---|---|---|---|
Size | Minor² | 75°F | 125°F | 175°F | 250°F | 300°F³ |
0.5 US | — | — | — | — | — | — |
STD | 2.643 | 0.007 | 0.023 | 0.040 | 0.064 | 0.081 |
0.5 OS | — | — | — | — | — | — |
1 OS | 2.663 | -0.013 | 0.003 | 0.019 | 0.043 | 0.060 |
1.5 OS | 2.673 | -0.023 | -0.007 | 0.009 | 0.033 | 0.049 |
2 OS | — | — | — | — | — | — |
2.5 OS | — | — | — | — | — | — |
NBR (mm) – Fits (+Compression / -Loose) | ||||||
---|---|---|---|---|---|---|
Size | Minor² | 24°C | 52°C | 79°C | 121°C | 149°C³ |
0.5 US | — | — | — | — | — | — |
STD | 67.13 | 0.18 | 0.58 | 1.02 | 1.63 | 2.06 |
0.5 OS | — | — | — | — | — | — |
1 OS | 67.64 | -0.33 | 0.08 | 0.48 | 1.09 | 1.52 |
1.5 OS | 67.89 | -0.58 | -0.18 | 0.23 | 2.643 | 1.24 |
2 OS | — | — | — | — | — | — |
2.5 OS | — | — | — | — | — | — |
NBR-HPX/HPW (in.) – Fits (+Compression / -Loose) | ||||||
---|---|---|---|---|---|---|
Size | Minor² | 75°F | 125°F | 175°F | 250°F | 300°F³ |
0.5 US | — | — | — | — | — | — |
STD | 2.640 | 0.010 | 0.026 | 0.043 | 0.067 | 0.084 |
0.5 OS | — | — | — | — | — | — |
1 OS | 2.660 | -0.010 | 0.006 | 0.022 | 0.047 | 0.063 |
1.5 OS | 2.670 | -0.020 | -0.006 | 0.022 | 0.047 | 0.063 |
2 OS | — | — | — | — | — | — |
2.5 OS | — | — | — | — | — | — |
NBR-HPX/HPW (mm) – Fits (+Compression / -Loose) | ||||||
---|---|---|---|---|---|---|
Size | Minor² | 24°C | 52°C | 79°C | 121°C | 149°C³ |
0.5 US | — | — | — | — | — | — |
STD | 67.06 | 0.25 | 0.66 | 1.09 | 1.70 | 2.13 |
0.5 OS | — | — | — | — | — | — |
1 OS | 67.56 | -0.25 | 0.15 | 0.56 | 1.19 | 1.60 |
1.5 OS | 67.82 | -0.51 | -0.10 | 0.30 | 0.91 | 1.32 |
2 OS | — | — | — | — | — | — |
2.5 OS | — | — | — | — | — | — |
PERFORMANCE SPECIFICATIONS – Imperial | ||
---|---|---|
Flow Range | 150 – 350 GPM | |
Speed Range | 90 – 220 RPM | |
Torque Slope | 4.02 ft-lb./psi | |
Rotation | 0.630 rev/gal | |
Off Bottom Pressure | 90 psi |
PERFORMANCE SPECIFICATIONS – Metric | ||
---|---|---|
Flow Range | 570 – 1330 lpm | |
Speed Range | 90 – 220 RPM | |
Torque Slope | .79 Nm/kpa | |
Rotation | 0.1664 rev/litre | |
Off Bottom Pressure | 630 kpa |
PERFORMANCE DETAILS – Imperial | ||
---|---|---|
NBR | NBR-HPX/HPW | |
Max Diff. Press. | 1010 psi | 1580 psi |
Stall Diff. Pressure | 1510 psi | 2480 psi |
Max Torque | 4050 ft-lb. | 6330 ft-lb. |
Stall Torque | 6070 ft-lb. | 9970 ft-lb. |
PERFORMANCE DETAILS – Metric | ||
---|---|---|
NBR | NBR-HPX/HPW | |
Max Diff. Press. | 7000 kpa | 10900 kpa |
Stall Diff. Pressure | 10400 kpa | 17100 kpa |
Max Torque | 5500 Nm | 8600 Nm |
Stall Torque | 8300 Nm | 13600 Nm |
Imperial

Metric

Operating a power section above the maximum recommended differential pressure will reduce stator life. Performance Curves are for reference only. Actual power section performance may vary depending on the down hole temperature and rotor/stator fit. Performance data are subject to change without notice. Power calculation is based on maximum RPM and full torque. Stator sizes subject to change without notice.